IntelliCon CHW 
The CHW is a microprocessor-based fuel-saving control for commercial hot-water heating systems. The CHW reduces: fuel consumption, wear on parts, flue emissions and electrical usage, when installed on any new or existing gas or oil burner.
Features
Features
- For systems with ratings above 2.5 million BTU / hr.
- Illuminated LCD display shows fuel consumption savings, operating modes, system diagnostics and operating temperatures
- Patented process reduces fuel consumption—typically 10% to 20%
- Short payback period—typically 4 to 18 months
- UL listed, “Energy Management Equipment”
- Increased savings without replacing or upgrading costly system components
- “State-of-the-art” microcomputer controller
- Easily installed plug-in sensor(s) (includes 1 required sensor)
- Simple installation by qualified installer
- Fail-safe operation
- Easily programmed and no follow-up visits required
- Maximum efficiency year-round
- Reduces maintenance and extends boiler life
- Guaranteed to reduce fuel consumption
- 15-year replacement warranty for breakdowns or defects
Specifications
Specifications
- Mounting on vertical surface via 3-point mounting system
- Size: 7 1/2"H x 9 1/2'W x 4'D
- Operating Humidity: 5% - 95% Non-Condensing
- Operating TemperatureRange: -10°F - +120°F
- Power Input: 24/115/220 VAC @ 5W
- Control Circuit: 24 VAC/DC, 115/220 VAC
- Relay Contact: 10A @ 220VAC General Purpose
- Made in USA
Accessories
Accessories
- 10’ Hydronic Temperature Sensor (4001A)
- 20’ Hydronic Temperature Sensor (4002A)
- Remote Display Unit (4075)
Intellidyne offers six different energy economizers and reset controls designed to make commercial heating systems operate more efficiently resulting in lower heating costs and reduced pollution. Our commercial control applications include hydronic and steam boiler systems larger than 400,000 BTU input as well as forced warm air systems up to 300,000 BTU input.
The FA is a microprocessor-based, fuel-saving control for forced-air heating systems. The FA reduces: fuel consumption, wear and tear on parts, flue emissions and electrical usage, when installed on any new or existing forced air heating system.
Learn More...
The LCH is a microprocessor-based, fuel-saving control for light-commercial hot-water (hydronic) heating systems. The LCH reduces fuel consumption, wear on parts, flue emissions and electrical usage, when installed on any new or existing gas or oil burner. The LCH saves energy by adjusting the burner run pattern to match the system’s “heat load”.
Learn More...
The CAC typically reduces Commercial Air Conditioning / Heat Pump electric consumption by 10% to 20% or more. The CAC is a microprocessor-based, UL listed, electronic control that uses intelligent Dynamic Cycle Management (DCM) technology to automatically adjust the compressor cycles to achieve the greatest efficiency and reduced electrical usage, while assuring consistent temperature levels.
The CHS is a microprocessor-controlled, fuel-saving economizer for commercial steam heating systems larger than 2.5 mm BTU/hr. The CHS reduces: fuel consumption, wear on parts, flue emissions and electrical usage, when installed on any new or existing gas, oil or propane burner. The CHS saves energy by adjusting the burner run pattern to match the system’s “heat load”.
Learn More...The CHW is a microprocessor-based fuel-saving control for commercial hot-water heating systems. The CHW reduces: fuel consumption, wear on parts, flue emissions and electrical usage, when installed on any new or existing gas or oil burner.
IntelliCon CHS 1110
The CHS 1110 is a microprocessor-controlled, fuel-saving economizer for commercial steam heating systems larger than 2.5 mm BTU/hr. The CHS reduces: fuel consumption, wear on parts, flue emissions and electrical usage, when installed on any new or existing gas, oil or propane burner. The CHS 1110 saves energy by adjusting the burner run pattern to match the system’s “heat load.” Its action is similar to the industry-accepted method of “outdoor-air temperature reset control,” but does not require an outdoor-air temperature sensor or the need to profile the building in order to adjust the “reset” controller properly. The CHS 1110 Dynamic Cycle Management® (DCM) determines the “heat load” by using an easily installed pressure sensor that monitors the boiler’s steam-pressure and the rate the pressure is changing.
Features
Features
- Patented process reduces fuel consumption—typically 10% to 30% or more
- Short payback period
- UL Listed “Energy Management Equipment”
- Increased savings without replacing or upgrading costly system components
- “State-of-the-art” microcomputer controller
- For systems with ratings above 2.5 million BTU/hr
- Easily installed plug-in sensor(s) (ordered separately)
- Illuminated LCD display shows operating modes, diagnostics, system temperatures and economizing time.
- Simple installation by qualified installer
- Fail-safe operation
- Easily programmed and follow-up visits required
- Maximum efficiency year-round
- Reduces maintenance and extends boiler life
- Guaranteed to reduce fuel consumption
- 15-year replacement Global warranty for breakdowns or defects
Specifications
Specifications
- Mounting on vertical surface via 3-point mounting system
- Size: 7 1/2"H x 9 1/2'W x 4'D
- Operating Humidity: 5% - 95% Non-Condensing
- Operating TemperatureRange: -10°F - +120°F
- Power Input: 24/115/220 VAC @ 5W
- Control Circuit: 24 VAC/DC, 115/220 VAC
- Relay Contact: 10A @ 220VAC General Purpose
- Steam Pressure Sensor Sold Separately
- Made in USA
Accessories
Accessories
- Low Pressure Steam Sensor 2-25 PSI (4006)
- High Pressure Steam Sensor 26-145 PSI (4005)
- Remote Display Unit (4075) System 12 (RDU LED Display)
- Iron Pigtail (4050)
IntelliCon® FA 3300
The IntelliCon® FA 3300 is a microprocessor-based, fuel-saving control for forced-air heating systems. The FA reduces: fuel consumption, wear and tear on parts, flue emissions and electrical usage, when installed on any new or existing forced air heating system.
Features
Features
- For commercial & residential warm air systems up to 300,000 BTU
- Patented process reduces fuel consumption—typically 10% to 30% or more
- Illuminated LCD display shows fuel consumption savings, operating modes, system diagnostics and operating temperatures
- Saves fuel without replacing or upgrading costly system components and without violating manufacturers’ warranties
- Saves energy without sacrificing comfort
- Guaranteed to reduce burner run time
- Short payback period—typically 4 to 18 months
- Works with any thermostat including setback and multi-zone thermostats
- UL listed, “Energy Management Equipment”
- “State-of-the-art” microcomputer controller
- Easily installed plug-in sensor(s) (includes 2 required sensors)
- Simple 60 – 90 minute installation by qualified installer
- Fail-safe operation
- Easily programmed and no follow-up visits required
- Maximum efficiency year-round
- Reduces maintenance and extends furnace life
- 15-year replacement Global warranty for breakdowns or defects
Specifications
Specifications
- Mounting in any position via molded-on 1/2" Electrical Fitting
- Size: 4"H x 4"W x 2 1/2"D
- Operating Humidity: 5% - 95% Non-Condensing
- Operating TemperatureRange: -10°F - +120°F
- Power Input: 24/115/220 VAC @ 5W
- Control Circuit: 24 VAC/DC, 115/220 VAC
- Relay Contact: 10A @ 220VAC General Purpose
- Made in USA
Accessories
Accessories
- Remote Display Unit (4075) System 12® with LED Display
- Rain-Tight Enclosure Plastic (4065)
- Sensor Weather Enclosure Duct (4066)
Find A Pro
|
Click here to locate a Certified Intellidyne Contractor near you. |
 |
Stay Informed
Click here to sign up for Intellidyne’s informative, exclusive and absolutely free newsletter.
Sign Up Now
Join Our Team
|
Click here to learn about becoming a Certified Intellidyne Contractor. |
 |
|
CALCULATE: Your heating and cooling cost |
|
|
|
|
|
NYSERDA: Home Performance Program |
